Fascia Board Repair in the Hudson Valley, NY

It is what the gutter mounts to. Hangers screw into the fascia, and sound wood there lets your gutter hold a full load of rain, snowmelt and wet leaves without tearing away from the house.

Usually not without pulling the gutter down. If water has been running between the gutter and the board for a while, expect some rot. Other signs are flaking paint, spots that give when you push on them and a gutter sagging between hangers, and a Solutionist looks for all of these on a free estimate.

Yes, as long as the wood beneath is still solid. Aluminum fascia wrap comes in several widths and slips over the existing board. If the wood is too rotted, we replace it, and in both cases your gutter is rehung on new hangers.

Yes. Many older homes were built with deep overhangs and open rafter tails instead of fascia, on the idea that the overhang throws water clear of the walls. It often does not. One option is a roof strap, which clips into a hidden hanger inside the gutter and fastens up onto the roof. That works on many roofs, but we do not recommend straps on slate, tile or cedar shingle, so on those we extend the overhang and add a fascia board.

It comes down to how often the board gets wet and how long it stays that way. Gutters that overflow behind the trough and homes that went years between cleanings are the usual culprits. When fall leaves are left in the trough, meltwater backs up behind them and soaks the board through every freeze and thaw.

Yes. If the soffit is damaged or missing, we install perforated vinyl soffit. Those small vents keep air moving through the attic, which takes heat out in summer and helps keep moisture from building up in winter.

Rain and soaked leaves make a gutter heavy, and soft wood cannot hold the hanger screws snug under that load. The screws back out, the run sags and the slope no longer moves water to the downspout. A new board with new hangers brings the pitch back.